Phone : +62 21 6530 7382
+62 21 6583 3568
Fax : +62 21 6516 120
E-mail : info@telemut.com
priceptstp@yahoo.com
● Microprocessor-controlled.
● Measures the voltage drop as if 16A was flowing
between Line and Neutral.
● Displays voltage without current (V at 0A).
● Display voltage as if 16A flowing between Line and
Neutral (V at 16A).
● Loop test for L-E
● PSC between L-N.
● Single one smart push button operation; ON, Scroll
through results and menus.
● Checks wiring integrity (LEDs).
● Auto off/auto ranging (software range).
● Combined prospective short circuit current, loop and
load tester.
● Display can be customized for large orders.
● Microprocessor-controlled.
● Displays and sound warning if external voltage
present.
● Displays mains voltage, scroll trough menus.
● Checks wiring integrity (LEDs and display).
● Single button operation.
● Auto-off/auto-ranging.
● Combined prospective short circuit current, PSC
and LOOP tester.
● Built-in carry case, test leads in separate pouch.
● Loop test for L-E and L-N and PSC.
● Voltage test L-N and L-E.
● Enables analysis of constituent components in L-E
and L-N loops giving resistance of earth, neutral
wire, live wire and transformer winding.
● Display can be customized for special orders.
● 60Hz available on request.
● Microprocessor-controlled.
● Built-in earth tester.
● Built-in loop/psc tester. 0.03-2000Ω (software ctrl).
● Built-in voltmeter.
● Built-in wiring checker.
● One push button smart control.
● Display L-N and L-E voltages. 50 to 280Vac (sine).
● Display line path impedance. 0.01-2000Ω (software ctrl).
● Display earth path impedance. 0.01-2000Ω (software ctrl).
● Display neutral path impedance. 0.01-2000Ω (software ctrl).
● Display psc line to neutral. 6kA@230Vac supply.
● Display psc line to earth. 6kA@230Vac supply.
● Re-scroll through previous results.
● Bat. ok/low battery indicator.
● Auto off function.
● Color-coded test leads.
● Rugged case.
● Ultra low power consumption.
● Microprocessor-controlled.
● Built-in earth tester.
● Built-in loop/psc tester. 0.03-2000Ω (software ctrl).
● Built-in voltmeter.
● Built-in wiring checker.
● One push button smart control.
● Display L-N and L-E voltages. 50 to 280Vac (sine).
● Display line path impedance. 0.01-2000Ω (software ctrl).
● Display earth path impedance. 0.01-2000Ω (software ctrl).
● Display neutral path impedance. 0.01-2000Ω (software ctrl).
● Display psc line to neutral. 6kA@230Vac supply.
● Display psc line to earth. 6kA@230Vac supply.
● Re-scroll through previous results.
● Bat. ok/low battery indicator.
● Auto-off function.
● Color coded test leads.
● Rugged Case.
● Ultra low power consumption.
● Microprocessor-controlled.
● 2 Lines × 16 Characters LCD.
● Auto-ranging / Auto-off.
● One Push Button Operation.
● Low Consumption.
● Better than 3% Accuracy (0.05-50Ω).
● Wiring Integrity Check (display + LEDs).
● Over temperature protection and indication.
● Stores previous readings.
● Measures : L-E and L-N AC voltages.
L-E and L-N Loop Impedance.
Prospective short circuits L-E and L-N.
Earth Spike, Line and Neutral
Impedances.
Filter Probe (162 CB-A)
● Works with any Tone Generator to identify wires
● Adjustable volume control for increasing sensitivity
to suit work environment
● 2 operation modes: Filter on / Filter off
● Auto-off function (5 minutes) prevents excess
battery consumption
● Power supply is available in any 9V battery with a
life of approximately 50 hours
● Phone jack is designed for headset or handset
● Flashlight function
Tone Generator (162 CB-G)
● Useful in locating and identifying cable pairs or
individual conductors
● Generates tones, and also serves as a continuity
and polarity tester
● A tone selector switch located inside the unit for
selection of the fast tone or the slow tone
● Two bi-colored LEDs for Line1 and Line 2 indicate
the polarities of the telephone lines
● The unit has alligator type terminals, a modular
cable of 4 conductors with a strong connector
● The tone and continuity functions are only applied
to Line1 (Modular connector)
Cable Tracer
● Trace wires or cables.
● Volume control.183 CB
● Tip & Ring identification.
● 2 bi-colored LEDs ( Line 1 & Line 2).
● Tone speed selection : Fast & Slow.
● A phone jack is designed for headset or handset. (Amplifier probe)
Phone Tester
● Continuity and resistance testing for voltage-free objects.
● Check direct and alternating voltages.
● Testing capacitors.
● Testing diodes.
● Power ON/OFF switch.
● The indication of the LED lamp and the sound of the
buzzer can occur at the same time.
● The LED indication for Power ON status.
Cable Tracer
● Trace wires or cables.
● Volume control.
● Tip & Ring identification.
● 2 bi-colored LEDs (Line 1 & Line 2).
● Tone speed selection : Fast & Slow.
● A phone jack is designed for headset or handset.
(Amplifier probe)
Digital Multimeter
● 4000 counts.
● ACV, DCV.
● Ohm, Diode, & Continuity testing.
● Auto-range.
● Data hold.
● Low battery indication.
● Select function.
● Auto-off.
● Non-Contact phase sequence detector
● Flashing LEDs and beeping buzzer indications
of AC 3-phase sequence
● Two functions in one unit: open phase and
phase sequence detection
● Convenient brightness switch to make the
indication visible in dim areas or sunlight
● Back cover magnet attaches the instrument
to the AC distribution panel, offering easy
measurement
● Detects 3-Phase AC voltage from 70V to 1000V
● Conductor size: 1~35mm
● Detection frequency range from 45Hz to 65Hz