• Telekomunikasi

• Elektronik

• Listrik

• Equipment

• Mekanikal

• Ukur - Metering

• Testing

testing

VOLTAGE DETECTOR

• AC 50kV and DC 50kV measurement with direct reading.
• 4000-count LCD.
• Input impedance : 400 Mohm
• Auto-ranging :   AC : 4.000kV / 40.00kV / 50.0kV   DC : 4.000kV / 40.00kV / 50.0kV
• MDP-50K must be connected with an approved hot stick,    such as HS-175, HS-120, HS-120R.
• Check phases are "in-phase" or "out of phase".
• Polarity indication : Positive / Negative
• Meets IEC 61243-2 for the range of 1~36kV.
• Backlight function.
• Auto power off.
• Power source : 1.5V(AA) alkaline battery × 2.
• Low battery indication(Multi-level).
• Protection class : IP66

• Single foamed hot stick.
• Universal sunrise fitting on the head to fit
• special tool fittings.
• Rated at 100 kV per 300mm (5 minutes).
• Can be connected to 275 HP HV proximity
• detector, 21X HVD capacitive HV detector
• and 277 HP Non-contact HV detector.
• Meets IEC 60855.
• Reasonable price.

 ● No user’s assembled parts.
 ● Dual color-coded scale (%, Vac).
 ● Neon indicator when >1200Vac.
 ● Lightweight, robust & compact.
 ● Carry case included.
 ● Compare between phases.
 ● Measure and test phase to earth.
 ● High quality fiberglass wound rod.
 ● Self powered operation. No battery required.
 ● DC version available.
 ● Measure phase to phase.
 ● Hi immunity to interference fields.
 ● Suitable for indoor and outdoor use.
 ● Current is limited to ±1 milli-ampere.
 ● Grounded or ungrounded systems.
 ● Meets IEC 61481 (excludes PC44K)

• Excellent drop, shock, and vibration resistance
• Rugged nylon molding
• Auto on (when voltage is detected)
• Loud audible alarm indication
• Built-in proving and self-test circuit
• Bright color-coded LEDs
• Utilizes standard 9V battery
• Interchangeable contact electrode
• Useable in all weather conditions
• Compatible with all link sticks
• Lightweight, robust and compact
• Models available from 11kV to 132kV
• Suitable for indoor and outdoor use
• Automatic or manual arming
• Accesses batteries easily
• Customized threshold voltage available upon request
• Auto off (if no voltage is detected)
• Waterproof design, protection class : IP65Measures both AC and DC voltages with digital multitester.
• Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories.      
• Lightweight and rugged.
• 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.

• Telescopic, compact, lightweight.
• High voltage detection.
• Low voltage detection.
• Self test button feature.
• Easy-to-recognize indication.      
• Waterproof.

• Telescopic, compact, lightweight.
• High voltage detection.
• Self test button feature.
• Easy to recognize indication.
• High intensity red light emitting diode and intermittent
• audible sound for easy recognition in full sunlight and
• noisy environments.
• Waterproof.

• 2 ranges for selection                                        
• There is no power consumption in ofNice mechanical slide switch for function selection : HIGH / OFF / LOW    
• The power consumption in low voltage detection, mode : Less than 20mA
• The power consumption in high voltage detection, mode : Less than 20mA
• Bright LED and audible alarm sound when voltage is present.
• Lightweight, robust and compact.
• Efficient and easy to use
• Users have to use the Hot Stick when test high voltages between 1.5kV~132kV
• SEW provides nice optional HS-175 and HS-120 for high voltage detection.
• Optional accessories :HS-175 Telescopic hot stick (triangle-type), HS-120 Hot stick

 ● Non-contact detection of live voltages

 ● Find faults in cables

 ● Check and detect live high voltage cables

 ● Trace live wires

 ● Check high frequence radiation

 ● Check grounding equipment

 ● Detect residual or induced voltages

• Measures both AC and DC voltages with digital multitester.
• Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories.      
• Lightweight and rugged.
• 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.

3 WIRE EARTH RESISTANCE TESTER

• Capable of measuring earth resistance and earth voltage.
• 2mA measuring current permits the testing of earth resistance without tripping earth leakage current breakers in the circuit under test.
• The test leads are supplied as standard accessories for simplified two-wire measuring system.
• Battery operated.
• Data hold function.
• Low battery indication.
• Calibration performed with supplied test leads.

• Capable of measuring earth resistance and earth voltage.
• 2mA measuring current permits the testing of earth resistance without tripping earth leakage currentbreakers in the circuit under test.
• The test leads are supplied as standard accessories for simplified two-wire measuring system.
• 0Ω adjustment (2120 ER)
• Battery operated.
• Data hold function.
• Low battery indication.
• Calibration performed with supplied test leads.

1820 ER / 2120 ER

3 Wire Earth Resistance Tester

• Capable of measuring earth resistance and earth voltage.
• 2mA measuring current permits the testing of earth resistance without tripping earth leakage currentbreakers in the circuit under test.
• The test leads are supplied as standard accessories for simplified two-wire measuring system.
• 0Ω adjustment (2120 ER)
• Battery operated.
• Data hold function.
• Low battery indication.
• Calibration performed with supplied test leads.

• Capable of measuring earth resistance and earth voltage.
• 2mA measuring current permits the testing of earth resistance without tripping earth leakage currentbreakers in the circuit under test.

• Auto power off function.

• The timer operates automatically for about three to five minutes when the "PUSH BUTTON SWITCH" and "TIMER ON BUTTON" are pressed together.
  This will keep test "ON" for the duration of the timer.
• Timer for test function (count 3-5 minutes)
• Battery operated.
• Data hold function.
• Small and lightweight.
• Calibration performed with supplied test leads.

• Microprocessor-controlled
• Measures earth resistance in three ranges: 40Ω,
• 400Ω, 4kΩ
• Capable of measuring earth voltage
• 3 ¾ digit (4000 counts)
• LCD backlight display
• 2mA measuring current permits testing of earth resistance without tripping earth leakage current breakers in circuit under test
• Data hold function
• Relative function
• Auto power-off function
• Low battery indication
• Calibration performed with supplied test leads

• High quality Taut Band movement.
• Capable of measuring earth resistance and earth voltage.
• 2mA measuring current permits the testing of earth resistance without tripping earth leakage current breakers in the circuit under test.
• The test leads are supplied as standard accessories for simplified two-wire measuring system. (1805 ER)
• In addition to facilitating for precision measurement, test leads for simplified two-wire measuring system also are supplied as standard accessories. (2105 ER)
• Battery operated.
• Battery check function.
• Calibration performed with supplied test leads.

1805 ER / 2105 ER

3 Wire Earth Resistance Tester