• Telekomunikasi

• Elektronik

• Listrik

• Equipment

• Mekanikal

• Ukur - Metering

• Testing

UKUR - METERING

Analogue Multimeter

 ● High quality Taut Band movement.
 ● Easy to read 3-color scale for mistake proof reading.
 ● Mirror scale: makes reading pointer easy.
 ● Safety features on all ranges.
 ● Safety features: safety fused and safety “OFF” position.
 ● dB measurement.
 ● Built-in stand makes reading and measuring easy.

• 3½ digit, high contrast LCD, with a maximum display
• of 1999
• Automatic polarity indication, zero adjustment
• Low battery (BAT) indication 
• Over range indication: highest digit of (1) or (-1)
• EN 61010-1  CAT III 600V,  EN 61326-1

ANALOGUE DISPLAY

• Large 90º wide and 84mm long mirror scale. (adapted  to digital, analogue maximum indication 2400)
• Shock and vibration resistant TAUT BAND movement
• Pointer can be selected to either left-hand zero (normal mode) or center zero (galvo-mode)
• In galvo-mode pointer deflects right to indicate positive polarity and left to indicate negative polarity   
• Automatic center zero and ohm zero
• Dimensions: 175(L) × 109(W) × 44(D)mm

Digital Multimeter

• 3½ digit, high contrast LCD, with a maximum display
• of 1999
• Automatic polarity indication, zero adjustment
• Low battery (BAT) indication 
• Over range indication: highest digit of (1) or (-1)
• EN 61010-1  CAT III 600V,  EN 61326-1

ANALOGUE DISPLAY

• Large 90º wide and 84mm long mirror scale. (adapted  to digital, analogue maximum indication 2400)
• Shock and vibration resistant TAUT BAND movement
• Pointer can be selected to either left-hand zero (normal mode) or center zero (galvo-mode)
• In galvo-mode pointer deflects right to indicate positive polarity and left to indicate negative polarity   
• Automatic center zero and ohm zero
• Dimensions: 175(L) × 109(W) × 44(D)mm

• 3000 counts with a maximum display of 2999
• Angled display for easier reading
• Auto scanning function for AC/DC voltage, and current
• Auto ranging
• Range change function
• Continuity check
• Diode & Capacitance measurement
• Data hold function
• Low battery indication
• Over range indication
• Fuse protection
• Special hook design for convenient handing

• 4000 counts LCD with a maximum display of 3999
• Angled display for easier reading 
• Auto ranging
• Bar graph LCD display
• Range change function
• Relative/Maximum/Minimum modes
• Peak hold mode
• VAHz mode measures frequency in voltage or current  mode
• 40MHz frequency counter
• Auto Power off
• Continuity check
• Data hold function
• Low battery indication
• Over range indication
• Fuse protection
• Special hook design for convenient hanging

• Display: 3½ digit liquid crystal display (LCD) with max. reading of 1999.
• Polarity: Automatic, (-) negative polarity indication.
• Zero Adjustment: Automatic.
• Over Range Indication: Highest digit of (1) or (-1) is displayed.
• Low Battery Indication: The (BAT) is displayed when the  battery voltage drops below the operating voltage.
• Measurement Rate: 3 measurements per second, nominal.
• Operating Temperature: 0°C to ±50°C, 0-70% RH.
• Storage Temperature: -20°C to +60°C, 0-80% RH, with battery removed.
• Accuracy: Accuracy Specifications at 23 ±5°C, less than 75% RH.
• Power: Single, 006P 9 volt battery
• Dimensions: 128(L)×72(W)×33(D)mm.
• Weight: Appro.200g(ST-3501), 183G(ST-3201)